Mendota DXV-45 DT4 - LX Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 55

background image

24

MENDOTA DESIGNER FRONTS INSTALLATION INFORMATION

The following Designer Fronts are available for the DXV-45 Fireplace:

1.  Andover Arched Door Kit with Firescreen with optional Overlays as listed below:
2.  Black Andover Overlay
3.  Pewter Andover Overlay
4.  Antique Copper Andover Overlay
5.  Gold Andover Overlay
6.  Prairie Rectangular Door Kit with Firescreen with optional Overlays as listed below:
7.  Black Prairie Overlay
8.  Pewter Prairie Overlay
9.  Antique Copper Prairie Overlay
10.  Gold Prairie Overlay
11.  Black or Gold Victoria Filigree
12.  Black or Gold Tuscany Filigree
13.  Millennia Flat Grills in four optional color schemes as listed below:
14.  Black Millennia Flat Grills
15.  Full Brass Millennia Flat Grills
16.  Classic Black and Brass Millennia Flat Grills
17.  Classic Black and Bright Silver Millennia Flat Grills

Information specific to the installation of the Andover and Prairie Fronts

The Andover Door and Prairie Door Fronts are designed to be “Full-Face” trim kits. These two Fronts cover an area
equivalent to that shown in the diagram below. Any material that protrudes into this area on the sides, top or bottom edges
can only be flush with the front surface of
the fireplace faceplate.

If planning to install either the Andover
Door or the Prairie Door Front,

DO NOT

COVER THE FACEPLATE OF THE
FIREPLACE WITH ANY MATERIALS.

Furthermore, any drywall or wall cover-
ing material that is adjacent to the sides,
top or bottom of the Fireplace’s faceplate
may not protrude out past the front sur-
face of the

Fireplace Faceplate’s front

surface.

The Andover and Prairie Doors Mounting
Faceplate (required for installation of the
Andover and prairie Doors) may be cov-
ered over with noncombustible facing
materials.

To install Tile, Marble, Slate, Stone,
Rocks or other noncombustible to en-
hance the arch shape of the Andover
Doors or the Rectangular shape of the
Prairie Doors, do so only after the Ando-
ver or Prairie Door Kits have been in-
stalled on the DXV-45 Fireplace.

«
...
23
24
25
26
27
...
»

Содержание DXV-45 DT4 - LX
























































Отзывы:

Нет отзывов

Похожие инструкции для DXV-45 DT4 - LX

Бренд: Majestic Страницы: 2

Бренд: Majestic Страницы: 24

Бренд: Majestic Страницы: 63

Бренд: Majestic fireplaces Страницы: 36

Бренд: Majestic fireplaces Страницы: 16

Бренд: Majestic fireplaces Страницы: 28

Бренд: Majestic Страницы: 24

Cayman PIT1014A

Бренд: Safavieh Furniture Страницы: 3

Бренд: Majestic Страницы: 20

Бренд: barbas Страницы: 100

astria Mission Mission42TMN

Бренд: IHP Страницы: 32

Бренд: Cal Flame Страницы: 32

Бренд: Vanguard Страницы: 30

Бренд: Duraflame Страницы: 22

Бренд: United States Stove Страницы: 44

Бренд: FMI Страницы: 20

Fire Ribbon Direct VEnt Slim 26"

Бренд: Spark Страницы: 48

BH47-093-999-32

Бренд: Better Homes and Gardens Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды