6 of 24
2. OPERATING INSTRUCTIONS
WARNING: Parts of the stove may get hot during opera�on
To turn the appliance on I/O operate the standby switch located on the rear of the stove just under the top
plate on the right hand side.
The flame effect can be turned on/off using the remote. When the flame effect is off the appliance remains
in standby. The appliance can be only operated by the radio frequency handset.
THE FOLLOWING FUNCTIONS CAN BE
CONTROLLED USING THE REMOTE HANDSET:
•
ON/OFF - FLAME EFFECT
•
HEAT SETTINGS
•
BRIGHTNESS OF THE FUEL AND FLAME
EFFECT
•
FLAME DUO COLOUR
•
FUEL BED COLOUR
•
THE FLAME EFFECT CAN BE TURNED OFF
USING THE REMOTE,
•
RETURNING THE APPLIANCE TO STANDBY.
TURNING ON THE APPLIANCE
If you do not use the appliance and handset
for 2 minutes the handset will go will go into
sleep mode.
Press the power bu�on to reac�vate.
Turn the appliance on and off by using the
remote handset. Press the power bu�on to
exit sleep mode. once out of sleep mode press the
power bu�on again to turn on.
CONTROLLING THE APPLIANCE
Press the menu buttons to select the
modes you want to control
HEAT - LIGHT - FLAME - EFFECT
TO ADJUST THE FLAME BRIGHTNESS
Ensure ‘light’se�ng is selected.
MENU
LED DISPLAY
FLAME/HEAT/LIGHT
LEVEL DISPLAY
LH MENU BUTTON
POWER BUTTON
CURRENT SETTING
RH MENU BUTTON
TOUCH DIAL
ROTATE FINGER ON THE TOUCH DIAL
ROTATE CLOCKWISE TO INCREASE
ROTATE ANTI CLOCKWISE TO DECREASE
LEVEL
CURRENT
SETTING
