19 of 24
A
B
C
SERVICING INSTRUCTIONS
12. REPLACING FUEL BED LEDS
•
To access the fuel bed LEDS, open the door on the stove
•
Remove any fuel effect material carefully, and set aside.
•
NOTE:
The complete assembly must be removed from the body, see previous sec�on page 17.
•
To replace the fuel bed led strip. Unclip the saddle clamps. B
•
Remove the led strip terminals from the cable block using a small screwdriver. C
•
Slide to led strip out of the fuel bed plate. A
•
When installing a new led strip, follow these steps in reverse, ensuring the wiringis installed as shown
on the diagram on page 19.
