manualshive.com logo in svg

MEN Mikro Elektronik G20-3U, Руководство пользователя

Поделиться
Скачать
MEN Mikro Elektronik G20-3U Скачать руководство пользователя страница 29

Functional Description

MEN Mikro Elektronik GmbH

29

20G020-00 E5 – 2014-01-21

2.8.2

microSD Card

The G20 provides an onboard microSD card slot on the bottom side of the mSATA
adapter card in the heat sink area. The slot is ready-to-use. The G20 is shipped
without a microSD card installed.

Please see MEN’s 

website

 for ordering options.

2.8.2.1

Inserting and Extracting a microSD Card on the mSATA 
Adapter

The microSD card has to be installed before the mSATA disk as it is difficult to
access it afterwards.

To install a microSD card, please stick to the following procedure. 

Power down your system and remove the G20 from the system.

Put the board on a flat surface.

Insert the microSD card into the slot with the contacts at the top.

Make sure that it clicks into place properly.

For extracting the card push it down and pull it out.

Содержание G20-3U


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды