Memorex MPH-6996 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 61

background image

4

When using your telephone equipment, these basic safety precautions should always
be followed to reduce the risk of fire, electrical shock, and injury to persons:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Use a dry cloth for

cleaning without liquid or aerosol cleaners.

4. Do not use this product near water; for example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

5. Do not place this product on an unstable cart, stand, or table. The telephone may

fall, causing serious damage to the unit.

6. Slots and openings in the cabinet and the back or bottom are provided for

ventilation. To protect the product from overheating, these openings must not be
blocked or covered. This product should never be placed near or over a radiator or
heat register. This product should not be placed in a built-in installation unless
proper ventilation is provided.

7. This product should be operated only from the type of power source indicated on

the marking label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where

the cord will be damaged by persons walking on it.

9. Do not overload wall outlets and extension cords, as this can result in the risk of

fire or electrical shock.

10. Never push objects of any kind into this product through cabinet slots, as they

may touch dangerous voltage points or short out parts that could result in a risk of
fire or electric shock. Never spill liquid of any kind on the product.

11. To reduce the risk of electric shock, do not disassemble this product. Take it to

qualified service personnel when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.

12. Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

A. When the power supply cord is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally when following the operating

instructions. (Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and
will often require extensive repair work by a qualified technician.)

Important safety instructions

UC351BH (MPH6996) OM Eng 8/10/01 5:25 PM Page 4

«
...
3
4
5
6
7
...
»

Содержание MPH-6996






























































Отзывы:

Нет отзывов

Похожие инструкции для MPH-6996

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 2

KX-TC1461B - Cordless Telephone

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 23

KX-T7885 - Battery For

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 52

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 132

Бренд: Panasonic Страницы: 12

HYBRID IP-PBX KX-TDA200

Бренд: Panasonic Страницы: 824

EASA-PHONE KX-T30810

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды