background image

6

Unplug all electrical appliances when you know an electrical storm is approaching.
Lightning can pass through your household wiring and damage any device connected
to it. This phone is no exception.

Warning:

Please do not attempt to unplug any appliance during an electrical storm.

The FCC Wants You To Know

Changes or modifications to this product not expressly approved by the manufacturer,
or operation of this product in any way other than as detailed by the reference guide,
could void your authority to operate this product. The equipment cannot be used on
public coin phone service provided by the telephone company. Connection to party
line service is subject to state tariffs. (Contact the state public utility commission,
public service commission or corporation commission for information.)

Range

Your new phone is designed to achieve the maximum possible range by transmitting
and receiving according to the highest specifications set forth by the FCC. We have
rated this phone to operate at a maximum distance with the qualification that the
range depends upon the environment in which the telephone is used. Many factors
limit range, and it would be impossible to include all the variables in our rating.

The Maximum Range rating of this phone is meant to be used as a means of
comparison against other range claims.

Telephone Line Problems

The FCC has granted the telephone company the right to disconnect service in the
event that your phone causes problems on the telephone line. Also, the telephone
company may make changes in facilities and services which may affect the operation
of your unit. However, your telephone company must give adequate notice in writing
prior to such actions to allow you time for making necessary arrangements to
continue uninterrupted service. 

If you are having trouble with your telephone service, you must first disconnect your
phone to determine if it is the cause of your problem. If you determine that it is the
cause, you must leave it disconnected until the trouble has been corrected.

Important electrical considerations

UC351BH (MPH6996) OM Eng  8/10/01  5:25 PM  Page 6

Содержание MPH-6996






























































Отзывы: