Meltem 5016-1-1, Руководство по установке

Страница: 26 / 32

Operating instructions
M-WRG-S/Z-T(-F,-FC) / M-WRG-S/Z-T(-F,-FC)-FU ventilation unit
- 26 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
info@meltem.com · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
11.3.1 Remove cover from ventilation unit
► Using both thumbs, press the two latches
(item 1 in Fig. 19) on the bottom of the
ventilation unit. The cover will come away.
► At the same time, push your index fingers
into the gap between the cover and hous-
ing, and lift the cover up from the housing.
11.3.2 Remove filter
► Turn the filter ring (item 1 in Fig. 20) using the hand grip (item 2 in Fig. 20) anti-clockwise
until the arrow on the filter ring (item 3 in Fig. 20) lines up with the arrow at the removal
position (item 4 in Fig. 20).
► Pull the filter ring together with the extract air filter out of the ventilation unit.
► Turn the filter cover (item 6 in Fig. 20)
using the hand grip (item 7 in Fig. 20)
anti-clockwise until the arrow (item 8 in
Fig. 20) on the filter cover lines up with the
arrow at the removal position (item 9 in
Fig. 20).
► Pull the filter cover together with the sup -
ply air filter out of the ventilation unit.
► Detach the extract air filter from the filter
ring.
► Detach the supply air filter from the filter
cover.
► Clean the filter ring and filter cover with a
damp cloth if they are dirty (see section
12).
Fig. 19: Remove cover from the ventilation unit
Fig. 20: Remove filter