Mellerware MA BAKER III 26500B, Руководство пользователя, Страница: 6 / 67

3.3 Once you have finished using the appliance:
3.3.1. Turn off and unplug the appliance from the mains.
3.3.2. Clean the appliance as described in the cleaning
section.
4. Cleaning
4.1. Disconnect the appliance from the mains and allow it to
cool completely before undertaking any cleaning task.
4.2. Bread pan: remove the bread pan by turning it in anti-
clockwise, then pulling the handle to remove it, wipe
inside and outside of pan with a damp cloth, do not use
any sharp or abrasive agents for the consideration of
protecting the non-stick coating. The pan must be dried
completely before installing.
4.3. Kneading blade: If the kneading bar is difficult to
remove from the axle, in such an event fill the Container
with warm water and allow it to soak for approximately
30minutes.The kneader can then be easily removed
for cleaning. Also wipe the blade carefully with a damp
cloth.
4.4. Lid and window: clean the lid inside and outside with a
slightly damp cloth.
4.5. Housing: gently wipe the outer surface of housing with
a wet cloth. Do not use any abrasive cleaner to clean as
this would degrade the high polish of the surface. Never
immerse the housing into water for cleaning.
4.6. Before the bread maker is packed away for storage,
ensure that it has completely cooled down, is clean and
dry, and put the spoon and the kneading blade in the
drawer, and the lid is closed.
4.7. Clean the appliance with a damp cloth with a few drops
of washing-up liquid and then dry. CAUTION! Do not
immerse electrical parts of the pan in any liquid.
4.8. Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning
the appliance.
4.9. Never submerge the appliance in water or any other
liquid or place it under running water.
5. Anomalies and repair
5.1. Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged, it
must be replaced and you should proceed as you would
in the case of damage.
26500B_IM.indd 6 2018-09-27 02:14:55 PM