Troubleshooting
Rev 1.0
Mellanox Technologies
58
Issue 7. The gateway is not working and unresponsive:
1.
Reset the gateway.
If resetting the gateway does not work:
1.
Unplug the gateway.
2.
Wait 5 minutes.
3.
Plug in the gateway.
4.
If the gateway comes on, use the MLNX-OS® management CLI to determine the
cause of the shutdown.
Issue 8. The last software update did not succeed:
1.
Connect the RS232 connector (CONSOLE) to a laptop.
2.
Push the reset button on the switch or management module.
3.
You will have ~ 5 seconds to stop the U-Boot by pressing Control-B.
4.
Choose the image to upload. Only use image 1 or image 2.
5.
Select the image to boot.
U-Boot 2009.01-mlnx1.4 (<date>)
CPU: AMCC PowerPC 460EX Rev. A at 1000 MHz (PLB=200, OPB=100, EBC=100 MHz)
Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache
Board: Mellanox PPC460EX Board
FDEF: No
I2C: ready
DRAM: 2 GB (ECC enabled, 400 MHz, CL3)
FLASH: 16 MB
NAND: 1024 MiB
PCI: Bus Dev VenId DevId Class Int
PCIE0: link is not up.
PCIE1: successfully set as root-complex
01 00 15b3 bd34 0c06 00
Net: ppc_4xx_eth0, ppc_4xx_eth1
Hit Ctrl+B to stop autoboot: 0
Mellanox MLNX-OS
Boot Menu:
1. SX_PPC_M460EX 3.2.0000-dev-HA 2013-04-10 12:02:49 ppc
2. SX_PPC_M460EX 3.2.0000-dev-HA 2013-04-11 14:05:39 ppc
3. U-Boot prompt
Choice: