11
b) Coffee grounds ejection into container
(optional)
The coffee grounds can be ejected via a special chute
into a container, rather than into the standard drawer.
This optional extra can be installed by our Technical
Service team.
c) Installation on cabinets (optional)
The machine can also be placed on cabinets, such as
the “cup Center 1”, “cup Center 2” and “cup Solitaire”.
Please refer to our Technical Service team.
For reasons of safety, the “cup Solitaire” must be
secured to the floor or wall in order to guarantee
stable operation. Alternatively, we can supply a
stainless steel base plate on which it can be screwed.
The necessary fixtures and instructions are provided
for each solution.
d) Adjusting the machine´s feet
The machine must be stable and free of vibration. If
this is not the case ...
➀
adjust the four
machine feet
by screwing them in
a downward direction. Secure each foot by
tightening the respective nuts.
8) Starting operation
Initial operation is started by our Technical Service
staff. Should you wish to start the machine yourself
after a longer period of inactivity:
➁
First insert the
spray protection plate
, as
illustrated. This prevents users from being
scalded by hot water, which can be ejected
during the heating phase.
❍
Turn the
water tap
on and …
❍
first carry out
manual cleaning
. As described on
page 22, this involves cleaning …
– the mixer unit
– the instant powder container
– the ground coffee container
– the storage urn.
❍
Then,
set up
the machine and start heating, as
described on page 12.
❍
When this is complete, start the
fully automatic
cleaning program
, as described on page 23.
Only then is the
machine ready to start
dispensing
products.
➀
➁
GB
Ausgedruckt von Pressworks.
14:16 01.06.105
Datei 04-11.DTP, Seite 8.
