14
15
14
15
• Charging capacity of the battery unit depends on
the amount of sunlight and is thus depending on
geographical position and weather. Obviously, in
Northern Europe the solar cells do not have the
same effect as in countries with more sunshine
hours, which may affect the effectiveness of
the light. If the weather is severely cloudy or on
short winter days, recharging may sometimes be
insufficient for normal use of the light.
INSTALLATION
Assembly
The appliance must be assembled before use.
Ensure that the light (7), the motion sensor (14) and
the solar cell panel (3) are all the right way round
(see the illustration).
• Attach the two flanges
on the motion sensor
(1) over the flange to
the light (6). Screw the
flanges together with a
bolt a nut.
• Attach the two flanges
on the solar cell panel
(2) over the flange to
the motion sensor
(13). Screw the flanges
together with a bolt a
nut.
Position
When choosing a position
for the appliance, ensure
that the solar cell panel can be angled in the
direction of the sun when the motion sensor and the
light are angled in the required direction.
• The appliance can be mounted on a wall, post or
similar using the bracket for wall mounting (12).
o First, securely screw the bracket onto the
desired place.
o Attach the light to the bracket using the
clamping screw (5) and a nut.
• The appliance may also be placed in the ground
using the accompanying spike.
o First, join the two parts of the spike (10 and
11).
o Press the spike into the ground, where you
wish the light to be placed. Gently step
on the support spike (9) in order to secure its
position in the ground.
o Press the bracket (8) securely on to the top
of the spike.
o Attach the light to the bracket using the
clamping screw and a nut.
PREPARING THE APPLIANCE
• Angle the solar cell panel so that it absorbs as
much sunlight as possible.
• Angle the light and the motion sensor until they
point in the required direction. Tighten the bolts
and nuts once each part has been correctly
adjusted.
• Leave the batteries to fully charge for two days
before using.
USING THE APPLIANCE
• Switch on the on/off button (4) at the reverse
side of the solar cell panel.
• The light now switches on when it is dark and
the motion sensor registers movement. The light
comes on for approx. 30 seconds at a time.
• The light switches off in sunlight and is
automatically recharged.
• The motion sensor registers movements within
a distance of up to 8 m at the angles of 60º
vertical, and 120º horizontal from the position of
the motion sensor.
• If the light does not switch on, possible causes
are that the motion sensor is affected by artificial
light sources, that the batteries are flat or that
the on/off button is at the position “OFF” (off).
• Turn the on/off button to position “OFF”(off), if
the light is not to be used for a longer period of
time.
CLEANING
• Regularly wipe the solar cell panel, the motion
sensor and the light with a well-wrung cloth.
• Never use corrosive or abrasive cleaning agents
as they may damage the plastic parts of the
appliance.
INFORMATION ON DISPOSAL AND RECYCLING
OF THIS PRODUCT
Please note that this Adexi product is marked with
this symbol:
This means that this product must not be disposed
of together with ordinary household waste, as
electrical and electronic waste must be disposed of
separately.
Содержание 677-002
Страница 23: ...23 23 ...