8
2
Ground spike
3
Power cable
4
Power supply
5
PRESS switch
6
Connection socket
7
Sealing ring
8
Sleeve nut
z
Technical data
Protection class:
IP44
Model number:
972-B
Light source:
10lx
Illumination time:
6 - 18 hour timer
Power:
0�1W
Light output:
10lm
Length of light row:
12 m
Power cable:
5 m
Mains adaptor input
voltage:
220 - 240V~, 50 -
60Hz
Mains adaptor output
voltage:
4�5 V
z
Safety information
Safety information
WARNING!
RISK OF ACCIDENTS OR FATAL
INJURY FOR INFANTS AND
CHILDREN!
Never leave children
unsupervised with the packaging material�
There is a danger of suffocation from the
packaging material� Children often
underestimate the dangers� Always keep
children away from the product�
This product can be used by children aged
8 years and over, as well as by persons
with limited physical, sensory or mental
abilities or lacking in experience and
knowledge, if they are supervised or have
been instructed as to the safe use of the
product and understand the resulting
hazards� Do not let children play with the
product� Cleaning and maintenance may
not be carried out by children without
proper supervision�
Do not use the product if you notice any
defects�
The row of lights must not be connected to
the mains power supply while still in the
packaging�
Once the light has reached the end of its
service life, it must be disposed of in
accordance with local disposal regulations�
The LEDs are non-replaceable�
The light must not be used without the
sealing ring
7
properly fitted to the cable
(see Fig� B)!
If using the product outdoors, you should
only ever connect the mains adaptor
4
to
an IP44-rated socket (see Fig� B)�
RISK OF INJURY!
When removing the
light, make sure that you also remove the
ground spike
2
so as to avoid any risk of
injury (e�g� trip hazard) (see Fig� A)�
TRIP HAZARD!
Please make sure that the
power cable
3
is routed in such a way
that nobody can tread on it or trip over it
(see Fig� A)�
z
Assembly
Please note:
Dispose of all packaging
material�
Please note:
Only use the mains adaptor
4
supplied with the product (see Fig� B)�
Fit the LED strip light
1
together with the
ground spike
2
(see Fig� A)�
Now connect the power cable
3
to the
mains adaptor
4
and then screw the
sleeve nut
8
tightly onto the mains
adaptor
4
(see Figs� A and B)�
GB
