Page 30
Operation
Display message
7. Press
"Program"
to
confirm the new value,
which then stops flashing
If more adjustment are
necessary, return to Point
4 and begin again,...
8. ...or press "Start-Stop" to
return to the "Function"
menu, and
9. Press "Start-Stop" again
to return to the starting
point
6.5 Automatic
preheating ________________________________________________
The Euroklav
®
23V-S has a preheating function by means of which the autoclave chamber can be heated to
the necessary temperature before a program starts, or can be maintained at this temperature between
cycles. This not only shortens the time for each cycle but also reduces condensation on the walls of the
chamber which helps to provide very good drying performance. If the automatic preheating is activated, then
this begins as soon as the power is switched on. In the default setting on delivery the automatic preheating is
on. The current setting for the automatic preheating can be changed as follows:
Operation
Display message
1. Hold down "+" button and
also press "-" button.
Select "Function" menu,
sub-menu "Print"
2. Press "+" (or "-") until the
display shows the
submenu "autom.
Preheating" ..
3. Press "Program", and the
display shows the
current option, here
"Preheating Yes"
4. Pressing the "Program"
button now alternates
between the options
"Preheating Yes/No",
here e.g. "No"
5. When the desired option
has been selected press
"Start-Stop" and return to
the "Function" menu,
then
6. ..press "Start-Stop" again
to return to the starting
point
Program Start-Stop
P r e h e a t i n g
N o
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
F u n c t i o n :
a u t o m . P r e h e a t i n g
Program Start-Stop
P r e h e a t i n g
Y e s
Program Start-Stop
F u n c t i o n :
a u t o m . p r e h e a t i n g
Program Start-Stop
1 4 : 2 7 : 1 2
- 0 . 0 2 b a r 2 5 ° C
Program Start-Stop
D a t e / T i m e
M i n u t e : 2 8
Program Start-Stop
F u n c t i o n
D a t e / T i m e
Program Start-Stop
1 4 : 2 7 : 1 2
- 0 . 0 2 b a r 2 5 ° C
