MeiTrack T366, Руководство пользователя

Страница: 8 / 23

MEITRACK T366 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 8 -
2.1.7 Starting the Engine by RFID/iButton
After swiping the authorized RFID card or the authorized iButton key touches the iButton reader, the driver must
start the engine within 1 minute. Otherwise, the tracker's output 1 will be triggered (engine cut-off), and thus the
driver cannot start the vehicle. At the moment, if you want to start the engine, swipe the iButton key/RFID card
again.
Before starting the engine, ensure that:
1. The tracker's input 2 is connected to the engine detection cable.
2. An iButton key or RFID card has been authorized.
3. The tracker's output 1 is connected to the engine control cable through a relay.
4. The RFID ignition function has been enabled by Meitrack Manager or MS03 tracking platform.
5. The RFID event has been enabled.
3 Product Functions and Specifications
3.1 Product Functions
3.1.1 Position Tracking

GPS + LBS positioning

Real-time location query

Track by time interval

Track by distance

Track by mobile phone

Speeding alert

Cornering report
3.1.2 Anti-Theft

Polygonal geo-fence alert

Engine or vehicle door status alert

Remote vehicle fuel/power cut-off

GPS blind spot alert

Towing alert

External power supply cut-off alert (for the device equipped with a battery)

Vehicle theft alert
3.1.3 Other Functions

SMS/GPRS (TCP/UDP) communication (Meitrack protocol)

Built-in 8 MB buffer for recording driving routes

IP67 water-resistance rating

Mileage report

Roaming parameter settings

Smart sleep mode

Built-in 3-axis accelerometer