MeiTrack T366, Руководство пользователя

Страница: 17 / 23

MEITRACK T366 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 17 -
effect immediately.
When the speed is a value ranging from 1 to 255 (unit: km/h), set the speed limit for output control. When the
driving speed is lower than the speed limit, the output control takes effect.
ABCDE: indicates the output 1, output 2, output 3, output 4, and output 5 respectively. When the parameter value
is 0 , the output is disabled. When the parameter value is 1 , data will be generated according to preset output mode.
When the parameter value is 2 , previous status will be remained.
Example:
Sending: 0000,C01,10,10000
Reply: 353358017784062,C01,OK
6.5.6 Setting I/O Port Status – C08
SMS sending: 0000,C08,IO0:Mn,IO1:Mn,IO2:Mn,IO3:Mn,IO4:Mn
SMS reply: IMEI,C08,IO0:Mn,IO1:Mn,IO2:Mn,IO3:Mn,IO4:Mn
Description:
1. IO0, IO1, IO2, IO3, and IO4 indicate I/O ports.
IO0: open collector 1 by default (yellow cable)
IO1: 1-Wire interface by default (green cable)
IO2: negative input 1 by default (grey cable)
IO3: positive input 2 by default (white cable)
IO4: AD input 1 by default (blue cable)
2. Mn indicates the I/O port status. The parameter value is as follows:
0: low trigger
1: high trigger
2: AD input
3: Remote control input
4: open collector
5: low output
6: PWM output
7: Buzzer alert output
8: 1-Wire
3. You can set one or multiple input ports at the same time. The command 0000,C08 is used to read I/O port
parameters.
Note:
1. IO0: Mn parameter value is 4, 5, or 6.
2. IO1: Mn parameter value is 0, 4, 5, 7, or 8.
3. IO2: Mn parameter value is 0, 1, or 2.
4. IO3: Mn parameter value is 0, 1, or 2.
5. IO4: Mn parameter value is 0, 1, 2, or 3.