MeiTrack T366, Руководство пользователя

Страница: 12 / 23

MEITRACK T366 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 12 -
6 First Use
6.1 Installing the SIM Card
1. Use the screwdriver to open the back cover.
2. Insert the SIM card into the card slot (card chip facing down).
3. Close the cover, and tighten the screws.
Note:

Power off the device before installing the SIM card.

Ensure that the SIM card has sufficient balance.

Ensure that the phone card PIN lock has been closed properly.

Ensure that the SIM card in the device has subscribed the caller ID service if you want to use your authorized
phone number to call the device.
6.2 LED Indicator
Press and hold down the power button for 3–5 seconds to start the device.
GPS Indicator (Blue)
Blink (every 0.1 seconds) The device is being initialized or the battery power is low.
Blink (0.1 seconds on and 2.9 seconds off) A GPS signal is received.
Blink (1 second on and 2 seconds off) No GPS signal is received.
GSM Indicator (Green)
Steady on A call is coming in or a call is being made.
Blink (every 0.1 seconds) The device is being initialized.
Blink (0.1 seconds on and 2.9 seconds off) A base station signal is received.
Blink (1 second on and 2 seconds off) No base station signal is received.
6.3 Device Configuration
6.3.1 Installing the USB Driver
1. Decompress the stsw-stm32102.zip file provided by Meitrack, locate the following file, and install the USB
driver on a computer with 64-bit Windows system.