File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
14 of 25
Revision:
V1.8
Confidential:
External Documentation
6.5.3 Arming/Disarming
There are two ways to set Arming, either through Wireless Remote control (Optional), or SMS Command
Suggestion: Using the optional accessory Wireless Remote Control and Buzzer Alarm to strengthen protection,
and please set the Function Phone Number to make sure it can be received the call and SMS Report while stolen.
Wireless Remote Control: Press the Lock key to Arm. If buzzer alarm installed, it will sound to confirm the
Arming successfully, else if buzzer is not available, then open the vehicle’s door to trigger a SMS alert or a
call to be sent to the function phone number. Press Unlock to Disarm.
SMS Command: Arming and Disarming by SMS Command.
Command:
0000,B21,Status
SMS Get:
IMEI,B21,OK
Note:
Status=1 Arming, Status=0 Disarming.
While in Armed status, and as been triggered by open door or engine starts; MVT800 will call or send SMS
report to the function phone number.
In the status of Disarm, all security alarms will be OFF.
Function
Call
SMS
Engine Cut Buzzer
Note
Open the
Vehicle’s
Door
√
√
√
While open the vehicle’s door without permission, the
buzzer will alarm all the time until unlock the status;
MVT800 will send call in turns and send SMS report to
the function phone numbers.
Start the
Vehicle
√
√
√
√
While start the vehicle, the engine will be cut to avoid
stolen, buzzer will alarm all the time until unlock the
status; MVT800 will send call in turns and send SMS
report to the function phone numbers.
Set Arming
while Driving
(Intercept
the Driving
Vehicle )
√
√
While the vehicle was stolen, arming
(the arming would
work only setting by SMS or GPRS while driving
) and it
can be stopped engine to intercept if the speed is lower
than 5km/h.
Tow Alarm
√
√
√
On the status of ACC off, the theft alarm will be trigger
while the vehicle vibrate.MVT800 will send call in turns
and send SMS report to the function phone numbers.
Please refer to the
MEITRACK SMS Protocol
for more detailed SMS command.
Copyright © 2014 Meitrack Group All rights reserved.
14
All manuals and user guides at all-guides.com
