File Name:
MEITRACK MVT800 User Guide
Creator:
Meitrack
Project:
MVT800
Creation Date:
Update Date:
2013-03-03
2014-02-26
Sub Project:
User Guide
Page:
16 of 25
Revision:
V1.8
Confidential:
External Documentation
6.6.2 Set Function Phone Numbers
Command:
W******,003,F,P,T
Description:
Function Phone Number are to receive calls and SMS reports of SOS Alarms, the Alarm and Location
of Input 2/Input 3, and Open the Vehicle’s door or Start the Vehicle without permission.
Note:
F=0, Off (Default)
F=1, Send SMS report only
F=2, Send SMS report and Call
P=1, Set SOS function phone number (Input 1), default to be the number receiving the alarm while open the
Vehicle’s door or start the Vehicle without permission.
P=2, Set the function phone number of Input2
P=3, Set the function phone number of Input3
T: Default Function Phone Number, Max 16 characters.
Example
:
W000000,003,1,1,88888888
Please refer to the
Meiligao Protocol
for more detailed SMS command.
6.6.3 Arming/Disarming
The same method of Meitrack Protocol, please refer to 6.5.3 Arming/Disarming
6.7 Advanced Settings
6.7.1 Vehicle Transfer Coefficient Function
Please connect digital input 5 to vehicle speed sensor then the vehicle’s speed can be calibrated by setting Vehicle
Transfer Coefficient. Vehicle’s speed and
mileage
will be calculated by the latest transfer coefficient after
calibration successfully.
Two methods:
1. Calibrate Automatically: GPS Speed will be calibrated automatically by transfer coefficient
1) Vehicle has been driving for 60s by the speed beyond 60km/h sequentially.
2) MVT800 has recorded the pulse numbers of sensor in 60s.
3) No sound prompt
4) It won’t be calibrated if there is no pulse.
Copyright © 2014 Meitrack Group All rights reserved.
16
All manuals and user guides at all-guides.com
all-guides.com
