Meinberg IMS-RSC, Руководство по установке

Страница: 9 / 20

4 LEDs, Switches, and Interfaces on the
IMS-RSC180
RSC180
RSC180/MDU
ACO
1
2
4
1
2
3 3
5
1. LED Indicator
Clock 1 / Clock 2 (SDI 1 / SDI 2)
These LEDs show which of the two reference clocks is currently the "Master Clock".
Remote
This indicates whether the module is currently being managed remotely over an Ethernet connection. In remote
mode, the Master Clock can be selected using an SNMP command. The most recent state set while in remote
mode will be retained after control is handed back to the local automatic controller, unless this state is incon-
sistent with the control logic (e.g., if the clock has been configured to run solely from the oscillator).
Init
This LED lights up blue while the RSC switch control module is being initialized.
6 Date: December 17, 2021 IMS-RSC180