4 LEDs, Switches, and Interfaces on the IMS-RSC180
4.1 RSC180: DIP Switches
The various modes of the board can also be configured using onboard DIP switches.
Configuration Using DIP Switches
SW
NAME
Description
————————————————————————————————————————
1
DIS_ENA
Enables / disables signals if both clocks are out of sync
2
DIS_MAN
Enables / disables manual override via front panel controls
3
DIS_REM
Enables / disables remote mode
4
FUNCTION
RSC board functionality: either in an IMS system or as LAN interface
5
Reserve
6
Reserve
7
Reserve
8
DIS_MST
Enables / disables "Priority Master" clock selection
9
Clk1_Clk2
Selects Master Clock 1 or Clock 2 based on priority
10
EN_CLK
Activates the clock with a sync event after reset (only if DIP 1 is ON).
Figure: DIP Switches on RSC180
Description of DIP_SW positions:
Switch 1 Positions:
(0)
OFF:
If both clocks are out of sync, all output signals are disabled.
(1)
ON:
Even if both clocks are out of sync, outputs remain enabled on one of the clocks.
Switch 2 Positions:
(0)
OFF:
Front panel control functions enabled.
(1)
ON:
Front panel control functions disabled.
Switch 3 Positions:
(0)
OFF:
Remote control enabled.
(1)
ON:
Remote control disabled.
Switch 4 Positions:
(0)
OFF:
The RSC board is used in an IMS system.
(1)
ON:
LAN interface is enabled for configuration and monitoring.
Switch 5-7 Reserves.
Switch 8 Positions:
(0)
OFF:
"Priority Master" mode is disabled.
(1)
ON:
"Priority Master" mode is enabled.
IMS-RSC180
Date: December 17, 2021
9
Содержание IMS-RSC
Страница 1: ...SETUP GUIDE IMS RSC180 Hot Plug Module December 17 2021 Meinberg Funkuhren GmbH Co KG...
Страница 2: ......
