6.3 RSC Switch Card: Monitoring and Mangement
6.3.1 Configuration Using IMS-RSC180 via Web Interface
The following parameters are configured via the RSC module when using two receiver modules (redundant mode).
IRIG Settings:
Selection of the desired time code (output).
Programmable Pulses:
Configuration of the Programmable Pulse Outputs (PPO_1 - PPO_4).
Synthesizer:
Selection of output frequency (1/3 Hz to 10 MHz)
and phase (-180
◦
bis + 180
◦
).
Time Zone:
Selection of local time zone offset from UTC.
Enable Outputs:
Outputs always active or only when receiver is synchronized.
Miscellaneous:
GPS time scale (UTC, TAI or GPS), SSM Quality Level .
Initialize Receiver:
Initialization of date/time for both clocks.
Comprehensive documentation about the LANTIME Web Interface is available for download from our website:
http://www.mbg.link/doce-fw-ltos
14
Date: December 17, 2021
IMS-RSC180
Содержание IMS-RSC
Страница 1: ...SETUP GUIDE IMS RSC180 Hot Plug Module December 17 2021 Meinberg Funkuhren GmbH Co KG...
Страница 2: ......
