Meinberg IMS-RSC, Руководство по установке

Страница: 5 / 20

2 Introduction
This Setup Guide is a systematically structured guideline to assist you with the set-up of your Meinberg product.
Functionality of IMS-RSC180
The RSC Redundant Switch Control module controls the switchover mechanism between two reference clocks
in redundant systems with two Meinberg clock modules. The RSC is used to switch between the connected
clocks and to select the corresponding pulse, frequency outputs, and serial interfaces. The RSC module can
be configured with various operating modes that dictate how the module switches between clocks. The status
LEDs indicate which clock is currently selected as the Master Clock, as well as the current operating state of
the switch control module.
Please refer to the LANTIME Firmware Manual for a more detailed description of all of the status moni-
toring configuration options and features available for your Meinberg product.
LTOS Firmware Manual Download:
http://www.mbg.link/doce-fw-ltos
Compatibility
The IMS-RSC180 is compatible with the following systems in the IMS product family:
IMS System M500 M1000 M1000S M2000S M3000 M3000S M4000 IMS-MDU
The IMS-RSC180 can be used in the following slots:
PWR CLK SCU CPU MRI ESI I/O
IMS Slot
2 Date: December 17, 2021 IMS-RSC180