43 / 56
9760465
1. Press and hold the on/off key for approximately three seconds.
2. Enter the service code for the required authorisation level.
After entry of the correct code, the desired authorisation level (1, 4) is displayed in
the left field on the first digital position. If the entry is false, the message
Info 122
appears.
Authorisation level 1
– service level
Read service data (
service code: 10000
)
The operator can view the service data.
Read / modify service data (
service code 10001
)
The operator can carry out all functions required for normal operation and configure
the settings.
Authorisation level 4
– dosing equipment level
Read settings (
service code: 40000
)
The operator can view the data for the dosing equipment.
Read / modify settings (
service code 40044
)
The operator can view/edit all the relevant parameters for the dosing equipment.
8.10 Service level
Code display
Meaning
View parameter, see page 44.
Vent rinse pipe, see page 44.
Vent detergent line, see page 44.
Manually start regeneration, see page 45.
Reset the counter for replacing the partial
desalination cartridge, see page 45.
Содержание UPster H 500 M2
Страница 55: ...55 56 9760465 13 Notes...
