Meiko UPster H 500 M2, Руководство по эксплуатации

Страница: 37 / 56

37 / 56 9760465
A canister is empty.
1. Remove the suction lance from the empty canister and insert it into a full canis-
ter.
2. If necessary, ventilate the pipelines, see page 44.
8.5.3 Fill salt container
Caution
Damage to water softener if salt container is not filled
Fill empty salt container promptly if salt container control light is red !
If the capacity of the installed water softener is largely exhausted, the red control
light above the symbol for the salt container lights up.
1. Open door, open salt solution container and fill with 1.5 kg of regeneration salt
(sodium chloride with a grain size of 0.3 - 1 mm). If possible, use a loading
chute!
During filling, water and salt particles may overflow from the salt container!
2. Clean the seal and thread of the salt solution container and close tightly. The
ingress of wash water can cause capacity loss in the water softener!
3. Close door.
4. Start the self-cleaning programme (if necessary, switch off the dishwasher us-
ing the on/off key and then press the wash key) to dissolve any salt particles
that have escaped and pump them out of the tank. If the salt remains in the
wash tank for a long time, this can result in corrosion, and even pitting, in the
tank bottom.
Regeneration starts automatically once machine is ready for operation, see chap-
ter “Putting the machine into operation” on page 31and on the next page.