MEI CashFlow 520 Series, Карманный справочник

Страница: 34 / 37

CashFlow ®
520 changegiver Pocket Guide
30

,
MEI., 1996
Float the coin tubes
Floating the tubes through the acceptor
1. Press Mode + A, and insert change coins. When
the tubes reach the pre-set maximum float level,
further coins are routed to the cashbox.
Use the coin entry slots to replace any coin that
falls through a tube, so that it is not counted twice
by the acceptor.
2. Press A to return to normal operation.
Floating the tubes by hand
1. Insert a full coin cassette, or remove the unit’s
cassette and fill the tubes to the float levels.
If the cassette is difficult to remove, release it and
tilt it forward. Push in the coin filling flap, and fill
tube A through the gap. Fill tubes B and C through
the coin entry slots.
2. Press Mode twice, replace the cassette, then
press Mode + A + B.
3. Insert samples of non-change coins to check
they route to the cashbox.
4. Press A, B and C to check that coins are
dispensed.
5. Press Mode + A and refloat the tubes through
the acceptor.
When the pre-set level is reached, further coins are
routed to the cashbox.
6. Press A to return the unit to normal operation.
The unit is now ready for use