MEI CASHFLOW 2612, Инженерный справочник

Страница: 16 / 37

Cashflow
©
2612 Engineers Handbook
©
MEI 2009 Page 16 G1
Changer Configuration
The majority of Note Acceptors are fitted to a Changers MDB Peripheral loom. It is advisable that
some options within the changer are adjusted when a Note Acceptor is fitted.
MDB Peripheral Loom
Highest Banknote Value
In the Service Mode Menu there is an option to set the highest value of Banknote. This is under
Banknote Configuration.
It is normally set at €20.
Software
Since MEI software release V1.18 the behaviour of a Note Acceptor connected to the MDB
Peripheral loom is different. All the notes inserted will be held in escrow, which means not stacked
until the user makes a selection on the vending machine. Then the note will be stacked in the
magazine and the user will get the product and the change (in coins).
If the user inserts a note and presses the reject lever to get change, then the note will be returned.
This is to prevent users emptying the changer’s tubes without buying anything.
This option is only configurable with the STS tool.
Payout
If you are going to use a Note Acceptor it is recommended you change the payout of the Changer
adding one tube of €1 or €2 depending on the needs of the site. CF7000 has a wide range of pre-
programmed cassettes. Please contact your MEI technical support or local service center for further
information on this.
Testing
•
Apply power to the machine.
•
Check the Status LED for the "Steady ON" condition. If another condition exists, refer to the
Maintenance section for troubleshooting details.
•
Insert a note to check acceptance. If enabled, the note should be accepted.
•
Make a vend to ensure the proper credit is received and proper change is paid out for the note.
Warranty
All Cashflow
©
2612 Note Acceptors come with a Two Year Manufacturer’s Warranty. Once the unit
has been inspected, record the model and serial number from the label on the side of the note
acceptor. Refer to these numbers when you contact an MEI Approved Service Center for service or
information. The manufacturer’s warranty is based upon the date of manufacture. Parts and labour
are included in Warranty repairs.
The first four digits of the serial number contain the manufacturing date code (see Serial Number
Configuration section). This code indicates the beginning of the warranty period.