4
ON/OFF:
Main power to the machine is turned on by pulling the red mushroom button out,
and turned off by pushing it in.
MAIN SCREEN:
The main operating screen shown below allows you to choose the function
needed. From any of the operating screens the Reset key can be pressed and the Main button
with the wizard pictured on it and you will be returned to the main operating screen.
Auto Filling, Clean, Sanitize & Manual Override:
These operations are entered from
the Main screen show above by pressing the desired button. When any of these buttons are
pressed the screen will change to that operation. Note: The reset key must be pressed before
starting any operational mode except the Manual override functions.
RESET:
The RESET button is used any time the machine has been stopped, paused, or about
to be started in a new mode. The RESET always returns the machine to its starting conditions for
each mode. RESET must be used each time the machine enters a new operation before the
machine will start any program functions and before pressing the Main screen button.
CAUTION:
If the bottling machine is paused and rapidly RESET during a time when the
machine has pressure in the bottle (i.e., filling), pressure in the bottles will be released
rapidly without warning. Rapid release of pressure can be hazardous due to glass
breakage and liquid spray.
