Megger SR-98, Инструкция по эксплуатации

Страница: 4 / 93

SAFETY PRECAUTIONS
CONTINUED
The following are some specific safety related items associated with the SR-98 test
system.
Always start with the power OFF, before connecting the power cord. Make sure outputs
are off before attempting to make test connections.
Always use properly insulated test leads. The test leads supplied with the unit are rated
for the voltage output ratings of the test system, and should be properly used and cared
for. Do not use cracked or broken test leads.
Always lift and carry the test set using both carry handles. Improperly carrying the unit
by one handle could damage the handle.
Always turn the test system off before disconnecting the power cord. Turn outputs off
before removing or inserting test leads.
UNDER NO CIRCUMSTANCES SHOULD THE OPERATOR PUT HIS HANDS OR TOOLS
INSIDE THE TEST SYSTEM CHASSIS WITH THE
TEST SYSTEM CONNECTED TO A
POWER SOURCE. LETHAL VOLTAGES ARE PRESENT AND MAY CAUSE SERIOUS
INJURY OR DEATH!
INSTALLATION Category II
OPERATIONAL SAFETY
Every consideration has been given to the design and construction of the SR-98 to
make it a safe piece of test equipment as well as one that is accurate, reliable and easy
to use.
It must be remembered that the unit is capable of producing voltage and current levels
that can be deadly if personnel come in contact with them.
The SR-98 unit should be properly operated and serviced by qualified individuals who
have familiarized themselves with the unit and thoroughly read the instruction manual
provided with it.
If questions arise concerning care, operation or application of the unit that are not
explained in the instruction manual, contact an MEGGER representative.