Megger MPQSIM, Руководство пользователя

Страница: 18 / 72

M
AVTMMPQSIM Rev 1 May 2017
12
5. Plug the Phase C voltage lead (supplied with the Megger PQ Product) between
the Phase C 115V or 230V banana jack on the MPQ-SIM and the Phase C voltage
input of the MPQ1000.
6. Plug the Neutral lead (supplied with the Megger PQ Product) between the Phase
A RTN banana jack on the MPQ-SIM and the Neutral lead of the MPQ1000.
When used with the MPQ2000:
1. Connect the Phase C RTN jack on the MPQSIM to Earth Ground.
2. Connect the GND input on the MPQ2000 to Earth Ground.
3. Using two of the white Jumper Leads (supplied with the Megger PQ Product),
connect the VA-Low, VB-Low and VC-Low banana jack inputs on the MPQ2000
together in daisy-chain fashion.
4. Using the voltage leads supplied with the Megger PQ Product connect the Phase
A high input on the MPQ2000 analyzer to either the Phase A 115V or 230V
banana jack on the MPQ-SIM.
5. Using the voltage leads supplied with the Megger PQ Product connect the Phase
A low input to the Phase A RTN jack on the MPQ-SIM.
6. Using the voltage leads supplied with the Megger PQ Product connect the Phase
B high input on the MPQ2000 analyzer to either the Phase B 115V or 230V
banana jack on the MPQ-SIM.
7. Using the voltage leads supplied with the Megger PQ Product connect the Phase
C high input on the MPQ2000 analyzer to either the Phase C 115V or 230V
banana jack on the MPQ-SIM.
The MPQ2000 has differential voltage
inputs. Using the jumpers supplied with
MPQ2000 jump the voltage neutrals (lows)
together. Then connect the jumped
neutrals to the Phase A neutral jack on the
PQ Simulator. Then plug each channel to
the corresponding voltage channel on the
PQ simulator.
The MPQ1000 has a common neutral so no
jumpers are required. Plug each channel to
the corresponding voltage channel on the
PQ simulator. Plug the neutral lead into the
Phase A neutral jack of the simulator.
Low
Phase A
Voltage
High
Phase B
Voltage
Phase C
Voltage
Phase A
Voltage
Phase B
Voltage
Phase C
Voltage
Neutral / Return