Megger MPQSIM, Руководство пользователя

Страница: 15 / 72

AVTMMPQSIM Rev 1 May 2017
9
5
SAFETY
Warnings and Safety Precautions
WARNING!
Death, serious injury, or fire hazard could result from improper
use/installation of this instrument. Read and understand this
manual before installing this instrument.
 Installation of this instrument MUST be performed in compliance with the
National Electric Code and any additional safety requirements applicable to
your installation.

Installation, operation and maintenance of this instrument MUST be
performed by qualified personnel only. The National Electrical Code defines
a qualified person as one familiar with the construction and operation of the
equipment and the hazards involved.

Do not leave the instrument connected to the system under test when not in
use.

Do not touch circuit connections or any metal that is exposed due to
damaged insulation.

Do not use the instrument or connect it to any external system if it shows
any visible signs of damage, malfunction or if it has been stored in
unfavorable conditions.
 Always inspect the instrument prior to use.
 Replace any defective parts or return the instrument to an authorized center
for repair.
 Do not use the instrument or connect it to any external system if the
enclosure is open or any parts of the enclosure are missing.
 Only use specified batteries as described by this document, if applicable.
 The instrument shall not be used if any parts are damaged.
 This instrument is not intrinsically safe and must not be used in hazardous
atmospheres.
The following safety precautions MUST be taken whenever this product is installed.