Megger MOM2, Руководство пользователя

Страница: 20 / 48

20 MOM2 ZP-BD03E BD0333FE
4 FUNCTIONS AND SET UP
4.9 Audio signals
The MOM2 emits different sounds to give an audible
information / confirmation of an event / action. The
sound is emitted from a built-in buzzer and from the
Bluetooth headset (optional). The audio signals vary in
frequency, Low / High, and composition.
Audio signals Description
◼ ◼ ◼
. . .
The MOM2 is charging the
capacitor and is not ready for
measurement.
◼ ◼ ◼ ◼
. . .
Battery low
During capacitor charge
◼◼
Measurement in progress
◼ ◼
Pass signal
Measurement complete / Pass
Wake up
◼◼ ◼
Fail signal
Measurement complete / Fail
Label full
Stand-by
◼
When pressing Test / Trigger
while lock symbol is shown
◼ ◼◼
Delete confirmed
When press and hold the
Test / Trigger
Note: Only in LOG mode
◼ ◼
Hold
When pressing Test / Trigger
Note: Only in LOG mode
◼ ◼
Release
When pressing Test / Trigger
Note: Only in LOG mode
Legend
◼
Short - High tone
◼◼
Long - High tone
◼
Short - Low tone
◼◼
Long - Low tone
. . .
Continuous
4.10 Battery power supply
Charging
Before using the MOM2 the batteries should be
charged. Use the supplied charger and connect it
to the socket at the bottom of the MOM2. Typical
recharge time for fully discharged batteries is 3 hours,
at 25°C (77°F).
Tip Place the MOM2 upside down to get bet-
ter the cooling of the batteries.
Important
MOM2 cannot be used for testing during
charging.
LED
indicator Description Clarification /
Remedy
Green Fully charged
yellow
Green Charging
Red
yellow
Green Temperature limits
exceeded during
the charging. Charging will restart
when temperature
has decreased.
Red
Green Temperature limits
exceeded, too
high or too low,
before charging. Charging will start
when temperature is
within the limits.
Red Fault state. Wrong
battery type,
faulty battery. Disconnect the
charger and check
the batteries.
None Battery fault /
missing or other
fault Check batteries and
charger / cables
Replacing the batteries
1]
Loosen the two screws that holds the battery
plate at the back of MOM2, see figure below.