21
MAINTENANCE
WARNING
To avoid electrical shock, do not perform any servicing
unless you are qualified to do so.
SERVICE
If the instrument fails to operate, check battery and test leads,
and replace as necessary. If the instrument still doesn’t work,
confirm operating procedure as described in this User Manual.
Use specified replacement parts only. The meter must be
completely turned off while replacing either fuse or battery.
Battery Replacement
The meter is powered using a single 9V battery, NEDA1604,
JIS006P, IEC6F22 carbon-zinc or alkaline battery. Replace
battery if the low battery sign (
) is displayed and flashing.
Use the following procedure to replace the battery:
1. Loosen screws with suitable screwdriver and remove
battery cover as
Figure-9
.
2. Replace the used battery with a new battery of the
correct type.
Figure-9. Battery Replacement.
