Megger digiPHONE+2 Скачать руководство пользователя страница 91

Страница: 91 / 95

Using the Ferrolux management software on PC

8.1

Exporting and deleting measurement series from the

indicator unit

Proceed as follows to export measurement series from the indicator unit to the PC:

Step Action

Click on the

icon in menu bar on the left.

Result:

The measurement series stored on the device are displayed.

Click the measurement series you want to export in order to select them. To

mark multiple measurement series, hold down the Ctrl key.
Or you can mark all the measurement series displayed with a single click using

the

button above the measurement series list.

Click on

to export the marked measurement series.

Save the file in the required folder and under the required name.

The exported measurement series can be imported in a suitable application for

displaying KML files and displayed there. The measurements recorded at the

individual measurement points also can be reproduced in this way if this is

supported by the application that is used (example image from Google Earth).

Exporting

measurement series

Содержание digiPHONE+2
































































































Результаты поиска

Содержание digiPHONE+2

Отзывы:

Похожие инструкции для digiPHONE+2

Бренды по названию

Популярные бренды

Megger digiPHONE+2, Руководство пользователя

Результаты поиска

Содержание digiPHONE+2

Отзывы:

Похожие инструкции для digiPHONE+2

Бренды по названию

Популярные бренды