background image

PAT100 SERIES

Handheld portable appliance testers

An additional 250 V dc insulation test is available on all models 
for use on IT equipment, on devices or extension leads that are 
fitted with surge protection, or simply where it may be considered 
undesirable to use a 500 V test. 

Substitute leakage testing

Substitute leakage testing enables the measurements of AC leakage 
currents, which could differ significantly from the DC Insulation test 
results.
Substitute leakage testing is performed at less than 40 V ac. and 
does not require a mains supply.

Substitute leakage testing is used for measuring protective 
conductor current and touch current, in addition to an insulation 
test, or where it is considered an insulation test may damage 
equipment.

The Substitute leakage test will not operate equipment and so 
can be used where the operation of the equipment under test is 
undesirable.

Portable RCD testing (PRCD)

Portable RCDs can be tested using the PAT150. There is no need 
to find a non-RCD protected supply as the PAT150 will not trip 
external RCDs.
Both 10 mA and 30 mA RCDs can be tested both for disconnection 
times and the manual test button function.

Separated Extra Low Voltage (SELV) supplies

SELV supplies should be tested to ensure the output voltage 
does not exceed maximum limits as defined in the international 
regulations for Extra Low voltage systems. The PAT150 permits up 
to 50 V ac measurement, with a PASS or fail indication for SELV.

Differential Leakage (Protective Conductor Current), Touch 
Current & operational test

The PAT150 includes the facility for mains powered leakage test. 
This test has the benefit that equipment under test will function 
during the test sequence.

Battery life

The PAT120 & PAT150 operates from AA Alkaline or NiMH cells. 
Battery life is typically 4 days, based on 120 assets per day.
The PAT150R can be re-charged with NiMH batteries fitted.

 www.megger.com

 Product 

 selection table:

UK

 

PAT120

PAT150

PAT150R

 Connector Interfaces

 

 Mains test socket

BS1363

 Power supply

 AA alkaline/NiMH

 Rechargeable (PAT150R)*

 

 

 Testing

 Protective 
 Earth Resistance

 250 V insulation

 500 V insulation

 

 Cable test

 Live protective 
 conductor current

 

 Live touch current

 

 Substitute leakage

 Functional test  (part 
 of Live leakage test)

 

 10 mA PRCD 

 

 30 mA PRCD

 

 SELV voltage

 

 Lead 
 resistance nulling

 

 Function keys

 Class 1

 Class 2

 Lead/cord

 PRCD

 

 Single test

 

 LCD Backlight

 Setup

 

 On/Off

 Standard accessories

 4mm plug lead probe 
 + croc clip

1

2

2

 Extension
 lead adaptor

 BS1363

 AC Charger Adaptor 

 

 

 Mains Supply Cord

 

 Carry case

Содержание 1003-062

























Отзывы: