MEGA 2400 OPERATE
3
Siren / Horn Parking Light
LED
Doors
Starter
Dome Light
1. Arming
1 or 3 Chirps 1 Flash
Slow Flash Locking
Disable
2. Disarming
2 or 4 Chirps 2 or 3 Flashes
Unlocking
Turns on 30 sec
3. Trigger
Alarming
Flashes
Slow Flash
Disable Flashes
4. Panic
Alarming
Flashes
Flashes
5. Car-Jacking Alarming
Flashes
Disable Flashes
6. Car Locator 6 Chirps
12 Flashes
Locking
F. ACTIVE ARMING
– LOCK & ARM
1. Press
button on the transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed.
The vehicle door will lock and dome light turns on for 10 seconds upon arming when interfaced
with the security system.
SILENT ARMING / DISARMING:
Press the transmitter
and
buttons at the same time will
arm or disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be
through the vehicles parking lights only.
SHOCK SENSOR BY-PASS:
Press the
button on the transmitter two times within 3 seconds
will arm the security system and by-pass the shock sensor. The system will chirp one additional
time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed
to activate for one arming cycle only. The security system will return to normal operation during the
next arming cycle.
HIDDEN ALARM FUNCTION:
Press the
button first; within 3 seconds press the
button to
activate the hidden alarm function. The security system will arm and with “Hidden Alarm Function”.
The siren / horn will be silenced even if the sensor is triggered in the armed status.
G. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional Passive Arming feature, which allows the security
system to arm 30 seconds after the last door is closed. Operation is as follows.
1.
Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing
again once the vehicle all entrances are closed.
3. After 30-
second timer has elapsed, the security system will automatically “ARM”. The siren will
chirp [1] time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
(See Alarm Feature
“I
-
2”
Programming):
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS:
While the system disarmed, Press the
button twice, the
security will resp
ond with [1] chirp and LED will turn “ON”. The security system will remain in this
temporally state for as long as you wish. To exit passive by-pass, press the transmitter
or
button and the system will return to normal status.
H. ACTIVE DISARMING
– UNLOCK & DISARM
1. Press
button on the transmitter.
2. The siren will chirp
once
and parking light flash
once
to indicating that the security system is
now disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon
disarming when interfaced with the security system.
TAMPER DISARMING
: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light
flash 3 times.
PATHWAY ILLUMINATION
(See Alarm Feature
“II
-
4
”
Programming): This feature turns the
parking light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal.
TWO STEPS DOOR UNLOCK
(See Alarm Feature
“II
-
1
”
Programming): This feature will
independently unlock the driver’s door only when disarming the security system. Pushing the
button a second time within 3 seconds will unlock the other doors.
AUTOMATIC RE-ARM
(See Alarm Feature
“
I
-
3”
Programming): If this feature is selected, the
security system will automatically re-arm itself in 60 seconds after disarming with remote transmitter.
Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed.
