08
09
ENGLISH
ENGLISH
3. Main Menu
3. Main Menu
3.1.1 Satellite-Finder
18 V
Displays the LNB power supply status from the LNB. The values
are 13 V, 18 V or off.
Satellite
Displays the current satellite. Use the
t
u
buttons to change
the satellite or press OK to open the satellite list.
Transponder
Shows the current transponder. Press OK to open the transpon-
der list. Or enter the transponder data directly.
Search
Press OK to start the search.
Lock / Unlock
Indicates whether the satellite has been found.
Indicates if the satellite was not found (SEARCH).
PWR
Displays the current reception power in dBµV or dBm.
C/N
Displays the current C/N value.
FEC
Displays the current FEC value.
BER
Displays the current BER value.
Strength/Quality
Displays the current strength and the quality of the signal in%.
F1
Opens the antenna settings. (See page 12)
F2
Opens the transponder control. (See page 15)
F3
Increases the display of signal strength / quality.
F4
Change between dBµV and dBm.
STORE
Saves the current view in the save menu (screenshot)
3.1.2 Spectrum
100 / 95 / 85 / ...
Displays the graphical signal strength in dBμV. (Use the
pq
buttons to move the view up or down)
Start:
Shows the start frequency
End:
Shows the end frequency
Current:
Displays the current frequency (Use the t u buttons to move the
cursor to navigate through the frequency band)
Level:
Displays the current frequency value. Press OK to open the
transponder data and to display the evaluation.
F1
Opens other settings of the spectrum display
F1
Increases the frequency band (200 MHz, 400 Mhz or complete)
Antenna setting
Opens the antenna settings
F3
Switches from horizontal to vertical or vice versa
Stop
Stops the live spectrum analysis
OK
Opens the search menu
STORE
Saves the current view in the save menu (screenshot)
Advanced settings
