22
23
ENGLISH
ENGLISH
3. Main Menu
3. Main Menu
3.2.6 System
3.2.7 Constellation
In this menu you can set the antenna supply. Select between 5 V, 12 V or OFF.
Select the supply voltage according to your active antenna.
No supply voltage is required for passive antennas.
Analyze via channel number / frequency
Analyze via channels
If you select „Analyze by channel number“, you can manually select a channel (frequen-
cy). Press OK to start the constellation analysis.
If you select „Analyze by Program“, you can select the stored programs using the
t
u
buttons. The constellation analysis is updated automatically..
Note:
Press the F1 key to get more measured values.
