32
33
ENGLISH
ENGLISH
3. Main Menu
3. Main Menu
3.6 USB
3.5 System
Select language
Use the
t
u
buttons to select a different language from the
screen menu.
Screen setting
Press OK to change the brightness, color saturation, and cont-
rast. Use the
t
u
buttons.
Factory setting
Confirm with OK to reset the device to the factory setting.
ATTENTION: All settings you have made will be lost.
Time zone
Select your time zone.
Lock Alarm
Select ON if a signal is to be heard when a signal is found.
Buttons sound
Activates or deactivates the key tones of the device.
Auto shutdown
Set the minutes after the unit is automatically switched off
(standby) when no operation is performed.
Software version
Shows the current software version
USB ppgrade
If a new firmware is available for the device, you can update it
here. (A suitable firmware must be on the USB device before).
Press OK and select the file (firmware) to which you want to
update. Confirm with OK.
Satellite import
via USB
Import a satellite list from the USB device to the measuring device
(A suitable satellite list must first be on the USB device). Press OK
and select the file you want to import. Confirm with OK.
Export satellite
to USB
Press OK to export the existing satellite list to a USB device. The
process takes a few seconds.
Import channels
via USB
Import a channel list from the USB device to the meter (A suita-
ble channel list must first be on the USB device). Press OK and
select the file you want to import. Confirm with OK.
Export channels
to USB
Press OK to export the existing channel list to a USB device. The
process takes a few seconds.
Export data to
USB
Press OK to export the existing settings, data and evaluations
to a USB device. The process takes a few seconds. The data are
evaluated using a separate software. These can be found on our
website www.megasat.tv
Note:
Please always carry out a factory setting after a software update to complete all
changes. First you must save the required channel lists to USB.