Megaleds Orphos, Руководство по установке

Страница: 71 / 100

67
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
PROBLEM CAUSE SOLUTION
3. ONLY one of
the Navigation
Lights does
not light up
(continuation)
3. The cable or connector between the
navigation light that does not light up
is damaged, broken or disconnected.
3. INSPECT and REPAIR or REPLACE
the damaged component,
CONNECT
again, however CONSULT the Techni-
cal Support MEGALEDS.
4. The Anchor
Light does not
light up
1. The correspondent Anchor Light
Capsule is damaged.
1. REPLACE the Anchor Light Set
(15), however CONSULT the Technical
Support MEGALEDS.
2. The Central PCI Board (10) is dam -
aged or correspondent cable (GREEN)
is disconnected or damaged.
2. REPLACE the Central PCI Board
(10), however CONSULT the Technical
Support MEGALEDS.
3. The cable or connector between
the Anchor Light that does not light up
is damaged, broken or disconnected.
3. INSPECT and REPAIR or REPLACE
the damaged component, CONNECT
again, however CONSULT the Techni-
cal Support MEGALEDS.
4. The SB2 Switch is damaged or dis-
connected from terminal of the Boat
Power Electric Whip (46).
4.
INSPECT
and
REPLACE
the Switch
correspondent or CONNECT the corre-
spondent cable.
5. The Navigation Light correspon -
dent cable of the Boat Power Electric
Whip (46) is broken or damaged.
5. INSPECT and REPAIR the Naviga-
tion Light correspondent cable of the
Boat Power Electric Whip (46).
6. The Anchor Light correspondent ca -
ble of the Power Electric Whip (47) of
Female Connector (40) is broken, or
damaged in the pins, disconnected,
bad contact or oxidised.
6. INSPECT and REPAIR the Power
Electric Whip (47), the Female Con-
nector (30) and/or Male Connector
(40) .