Megaleds Orphos, Руководство по установке

Страница: 60 / 100

56
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
4. APPLY white or black Silicone Sealant around the Amended Power
Electric Whip (48) with the Coaxial Cable (50), in the hole pitch Ø 16 mm of the
Bracket Bolted Set (35), to seal this passage as the water (figure35);
5. CHECK the positioning of Bracket Bolted Set (35) on the targa or the
top of the boat, that is, whether it is in line with the longitudinal line of the boat.
If the alignment is NOT in accordance with plan,
DISMOUNT and CORRECT the
assembly, before to apply the Silicone Sealant.
6. FIT the ORPHOS into the Bracket Bolted Set (35) definitely (figure 27);
8.2 PROCEDURE TO ORPHOS WITH THE EXTENSIVE BASE SET (44):
8.2.1 INSTALLATION OF C-TOOGLE NYLON ANCHOR (38):
1. FOLLOW the instructions contained in item 7.2.1 of Chapter 7 -
INSTALLATION PROCEDURE OF ORPHOS Fi8 this Installation Handbook.
8.2.2 INSTALLATION OF THE POWER ELECTRIC WHIP (46) AND
THE COAXIAL CABLE (50) OF THE DIGITAL TV ANTENNA (16):
1. CONDUCT the Power Electric Whip (6 cables) (46) from Cabin Com -
mand Panel (see Chapter 9 - ELECTRIC SYSTEM ) through the interior of the targa
or the top of the roof until it reaches the hole of Ø 1 inch (Ø 25 mm) from the inter -
nal side;
2. LEAVE approximately 1.3 ft (40 cm) from the Power Electric Whip (46)
and the Coaxial Cable (50) outwards (figure 31);