Megaleds Orphos, Руководство по установке

Страница: 49 / 100

45
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM REVISION - 02 (MAY, 2020
th
)
6. COPY the position of the central hole B of the Bracket Bolted Set (35),
on the targa, marking with a pencil or fine point pen, as shown in figure 17;
7. REMOVE momentarily of the Bracket Bolted Set (35) on the targa;
8. APPLY the Adhesive
Drilling Template of Extensive
Base (26) on the targa.
9. POSITION the hole
C2 (Ø 1 inch or Ø 25 mm) of
Adhesive Drilling Template (26)
on the position marked in the pre-
vious item;
10. MARK lightly with
a punch tool, the centers of the
8 holes of Ø
½
inch and the cen-
tral hole Ø 25 mm on the targa or
the top the boat (figure 18);
11. DRILL all 9 marked
points on the targa or the top of
the boat (figure 19);
12. ENLARGE the 8
holes with drill Ø 1/2 inch or
Ø 13 mm;
central
hole C2
26
ADHESIVE DRILLING TEMPLATE (26)
for mounting the ORPHOS WITH the
Extensive Base Set (44)
8 holes of
Ø
½
inch
13. ENLARGE the central hole C2 with hole saw of Ø 1 inch or Ø 25 mm;
14. REMOVE the Adhesive Drilling Template (26);