Megaleds Orphos, Руководство по установке

Страница: 70 / 100

66
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
PROBLEM CAUSE SOLUTION
2. NONE of
the Navigation
Lights turn
on and the
Horn does not
sound.
1. The Navigation Light correspon-
dent cable of the Boat Power Electric
Whip (46) is broken or damaged.
1. INSPECT and REPAIR the Naviga-
tion Light correspondent cable of the
Boat Power Electric Whip (46).
2. The Navigation Light correspondent
cable of the Power Electric Whip (47)
of Female Connector (40) is broken,
or damaged in the pins, disconnect-
ed, bad contact or oxidized.
2. INSPECT and REPAIR the Navi-
gation Light correspondent cable of
the Female Connector Power Electric
Whip (47).
3. The SB3 Switch is damaged or dis-
connected from terminal of the Boat
Power Electric Whip (46).
3. INSPECT and REPLACE the cor-
respondent Switch correspondent or
CONNECT the correspondent cable.
4. The Central PCI Board (10) is dam -
aged or correspondent cable (RED) is
disconnected or damaged.
4. REPLACE the Central PCI Board
(10), however CONSULT the Technical
Support MEGALEDS.
5. F4 Fuse (5A) burnt
5.
REPLACE
F4 Fuse (5A) and
VERIFY
the cause of occurrence. If necessary,
CONSULT
Technical Support.
3. ONLY one of
the Navigation
Lights does
not light up
1. The correspondent Navigation Light
Capsule is damaged.
1. REPLACE the capsule, however
CONSULT the Technical Support ME -
GALEDS.
2. The Central PCI Board (10) is dam -
aged or correspondent cable (RED) is
disconnected or damaged.
2. REPLACE the Central PCI Board
(10), however CONSULT the Technical
Support MEGALEDS.