Megaleds Orphos, Руководство по установке

Страница: 54 / 100

50
INSTALLATION HANDBOOK - NAVIGATION LIGHTS INTEGRATED SYSTEM
REVISION - 02 (MAY, 2020
th
)
7. ACCOMMODATE the Emended Power Electric Whip (48) into the Ex-
tension Base Set (44);
8. POSITION the 8 Fixing Bolts of Bracket Bolted Set (37) (specification:
slotted or phillips bolts
Ø
¼ inch x 2 ½ inches) into the 8 mm holes of the Bracket
Bolted Set (35) to be screwed into the Guide Bushing (45) applied in the upper
surface of Extensive Base Set (44);
9. TIGHTEN all Bolts (37), according to figure 25;
10. CHECK the positioning of Bracket Bolted Set (35) on the Extensive
Base Set (44), that is, whether it is in line with the longitudinal line of the boat. If
the alignment is NOT in accordance with plan,
DISMOUNT and CORRECT the as-
sembly, before to apply the Silicone Sealant.
11. FIT the ORPHOS into the Bracket Bolted Set (35) definitely (figure 31);
figure 30B: Sealant point application
35
44 49
48
(*)
OBSERVATION:
The right side of the Exten-
sive Base Set (44) has been
removed for better visualiza-
tion of the interior of this com-
ponent, to understand the
sealing process of the hole of
Amended Power Electric Whip
(48).