Megalarm MEGA 3100, Руководство по эксплуатации

Страница: 9 / 12

Vibration Mode
Remote Control vibrates when the
system is triggered
Button Lock
Disable the transmission function
temporarily
Driver paging / Lose and Found
Someone is paging you in front of
your motorcycle
Low Battery
You have to replace the battery of
remote control.
C. PROGRAMMING OF THE LCD REMOTE TRANSCEIVER:
Transceiver Button Description Operation
(1 second)
LCD screen lamp turns on for
5 seconds.
Press and hold the button for
1 second, 1 melody sound to
confirm enters.
(3 seconds) Timer Programming Mode.
Press and hold the button for
3 seconds, 2-melody sounds to
confirm enter.
(5 seconds) Power Save Mode
Press and hold the button for
5 seconds, 1 melody sound to
confirm enters.
- -
Clear the Flash Icon and Melody
Sound on the LCD Screen Transmitter Press the button 3 times
within 5 seconds
-
(2-second)
Button Lock ( ) enable / disable
Press the button first within 3
seconds press and hold button
for 2 seconds.
-
(2-second)
Melody / Vibration
( )
Mode
Press the button first within 3
seconds press and hold button
for 2 seconds.
-
F
(2-second)
Program Count Down Timer
( )
(10-Minute / 20M / 30 M /1Hour /1.5H /
2.0H)
Press the button first within 3
seconds press and hold
F
button
for 2 seconds.
-
(2-second)
Enable / Disable Bi Sound
(Bi)
While
Pressing Button
Press the button first within 3
seconds press and hold
button for 2 seconds.
- -
(2-second)
Illumination On /Off Press within 3 seconds
1. Screen Lamp ON: Press and hold the button one second, with one melody sound and the LCD
screen lamp will turns on for 5 seconds
2. Power Save Mode For Remote Transceiver: While the power save mode, the LCD
remote transceiver uses “0” current to save the battery power.
Entry: Press & hold the button for 5 seconds, with one melody sound and
icon on the LCD screen to indicate entry the “power save mode”.
Exit: Press any button of the LCD remote transmitter to exit the “Power Save Mode”.
3. Clear the Flash Icon and Melody Sound: Press the button 3 times within 3 seconds will clear the
flash icon and melody sound on the LCD screen transceiver
4. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert user through
melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody
sound
only.
5. Button Lock:
It is useful if you want to disable the transmission function of the remote control
temporarily to prevent from any inadvertent pressing of buttons by others. Press the
button first, within 3 seconds press and hold the
( )
button for 2 seconds to activate
or cancel the button lock function, the icon will displayed on the LCD screen to show
the LCD remote transmitter is on “Button Lock”.
MEGA 3100 OPERATE
9