Megalarm MEGA 3100, Руководство по эксплуатации

Страница: 10 / 12

6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear beep sound from the
remote control as the remote control in this mode, vibrates itself if your security system is
triggered.
Press the
button first, within 3 seconds press and hold the ( ) button
for 2 seconds to select the mode of vibration or melody, the icon will displayed
on the LCD screen to show the LCD remote transceiver is on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen transceiver
If you want mute the “bi” sound mute always while press button. Press the
button first, within 3 seconds
press and hold the
(Bi)
button for 2 seconds to disable the “bi” sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash icon while pressing the
button of the LCD screen transceiver.
9. Set Up Fixed Count Down Timer:
1. Press the button first, within 3 seconds press and hold the
F
( )
button for 2 seconds, the
LCD screen will shows icon and timer (ie. 0:10) ,
2. Press the
F
( )
button again showing next order time on the screen ( ie.0:20), press them again
(ie.0:30)…..and so on.
3. Leave the buttons starting count down then icon flashes
Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2
hours maximum.
2.When count down timer showing 0:00 means to turn off the timer.
3. Press button for real time indication when the timer is counting down.
10. Out Of Range Indication: (See Feature II – 4 Programming.)
The system will automatically check the range every 30 minutes after armed.
1. If user is within the range, the icon will display on the LCD screen.
2. If user is out of range, it has five short “bi” sounds and the icon will disappear on the LCD screen.
Note: Programming “Out Of Range Indication” will decrease the life expectancy of battery.
11. Illumination
Illumination for the LCD display can be programmed “On” or “Off”. When programmed “On”, the LCD will
illuminate every time the remote control receives a page or transmits a command.
Press the
button twice, within 3 seconds press and hold the button for 2 seconds. The remote will
beep once for “On”, twice for “Off” and the light will turn on/off with each press.
Note: Programming “illumination “On” will decrease the life expectancy of battery.
D. TIMER SETTING:
Transceiver Button Description Press Transceiver Button
1
Press & Hold the
button for 3 seconds
Timer Setting (Hour)
*Flash digit for adjusting
for
–
and
F
for
+
Press the button once
Time setting (Minute)
*Flash digit for adjusting
for
–
and
F
for
+
2 Press the button once.
Alert Alarm Time Setting (Hour)
*Flash digit for adjusting
for
–
and
F
for
+
Press the button once
Alert Alarm Time Setting (Minute)
*Flash digit for adjusting
for
–
and
F
for
+
Press the button once Alert Alarm Setting ON / OFF
for
OFF
and
F
for
ON
3 Press the button once
Count Down Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
for
–
and
F
for
+
Press the button once
Count down Timer Setting (Minute)
*Flash digit for adjusting
for
–
and
F
for
+
Press the button once Count down Timer Setting ON / OFF
for OFF and
F
for ON
EXIT: Press and hold the button for 2 seconds or leave it for 10seconds, the system will exit the
programming mode.
1. Timer Setting: Example to AM10:30
1. Press & hold the button for 3 seconds, with two-melody sound and the “Hours” digit flashes for
adjusting.
MEGA 3100 OPERATE
10