Megalarm MEGA 3100, Руководство по эксплуатации

Страница: 5 / 12

F. SYSTEM OPERATING CONDITION:
Siren, Horn Parking Light LED Starter
1. Arming 1 Chirp 1 Flash Slow Flash Disable
2. Disarming 2 or 4 Chirps 2 or 3 Flashes Fast Flash or Off
3. Trigger Alarming Flashes Slow Flash Disable
4. Passive Starter Disable Flash Disable
5. Panic Alarming Flashes
6. Car Locator 6 Chirps 12 Flashes
G. ACTIVE ARMING:
1. Press button on transmitter.
2. The siren will chirp once and the parking light will flash once indicating the system is
armed. The LED will begin to flash and the engine starter will be disabled.
SILENT ARMING: Press the
F
button first, within 3 seconds press button on the
transmitter will arm your security system, No chirp sound will be heard, arm
confirmation will be through the motorcycles parking lights only.
ARMING WITH NOISELESS MODE: With the system disarmed, press the button once, the siren will
chirp once. Within 3 seconds, press button again. The siren will emit one short chirp indicating the system
is set and will be fully armed in 5 seconds with the noiseless mode for one arming cycle. In this mode,
whenever strong vibration or lesser vibration is presented to the protected motorcycle, the shock sensor
cannot trigger the system and just only emit a few warn away chirps.
ARMING WITH SHOCK SENSOR BY-PASS: Press the button on the transmitter three times within 5
seconds will arm the security system, by-pass the shock sensor. The system will chirp one additional time to
confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the next arming cycle.
PASSIVE STARTER DISABLES : (See Feature I
-
2 Programming)
The purpose of the feature is to protect the motorcycle from being stole at all times, regardless of whether or
not the alarm is armed.
The starter of the vehicle will be disable 60 seconds after the ignition is turned off. Once the key is turned off,
the LED will flash fast for 60 seconds.
After 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate) to indicate the
passive starter disable is activated and the system will not respond to any trigger input except the ignition
trigger.
ARMING WITH PATHWAY ILLUMINATION : Press the button once to arm the system, the siren will chirp
once. Within 3 seconds, press
F
button. The parking light will be turns “ON” for 30 seconds to illuminate your
pathway.
HIDDEN ALARM FUNCTION: Press and buttons at the same time the security system will arm and
with “Hidden Alarm Function”. The siren / horn will be silenced even if the sensor is triggered in the armed
status.
H. PASSIVE ARMING
(See Alarm Feature I – 3 Programming)
Active arming / disarming is controlling your security system via the remote transmitter. This security system
is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds
after the ignition switch is turns off. Operation is as follows.
1. Turn the ignition to the “OFF” position.
2. The security system LED will flash fast for 30 seconds. Each time a sensor is triggered during the passive
arming countdown, the 30-second countdown starts over.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING BY-PASS: While the system disarmed, press the
F
button twice within 3 seconds, the
security will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporarily
state for as long as you wish. To exit passive by-pass, press the
button or button and the system will
return to normal status.
I. ACTIVE DISARMING –
1. Press button on the transmitter.
2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now
disarmed.
MEGA 3100 OPERATE
5