Meeyi Y-670, Руководство пользователя, Страница: 9 / 14

9
3
．
2
．
5 Prompt setting
When buttons are triggered or transmitters send signal, the host has three modes to prompt: Light, Vibrate
and Beeps. Users can choose one or more of them. When the host is in standby status, long press
【
setting
】
once to
enter the system setting menu, like picture 3-5. Then press
【
up/down
】
to move to the “prompt setting”, like
picture 3-8. Next short press
【
setting
】
to enter the menu, like picture 3-26. Press the
【
up/down
】
to move to
diverse prompt modes, short press
【
setting
】
to choose one of them, then press
【
back
】
to quit.
Picture 3-26
3
．
2
．
6 Repeat signal
When buttons are triggered or transmitters send signal, the number of playing prompts can be selected as
needed, such as 1 time, 2 times, 3 times, 4 times or 5 times; users can choose one of them. In the standby mode,
long press
【
setting
】
once to enter the system setting menu, as shown in picture 3-5, then press
【
up and down
】
to move to Repeat signal, as shown in picture 3-9, then press
【
setting
】
to enter the setting menu of repeat time, as
shown in picture 3-27. Press
【
up and down
】
to move to different kinds of prompts, short press
【
setting
】
to
choose them, then press
【
back
】
to quit.
Picture 3-27
3
．
2
．
7 Signal setting
Users can not only set the timing automatic switch to receive the signal but also manually turn on/off the
signal receiving function to avoid being disturbed and to achieve power saving. In standby status, long press the
【
setting
】
once to enter the system setting menu, as picture 3-5. Press
【
up/down
】
to move to “switch working”,
like picture 3-10; then press the
【
setting
】
to enter the “switch working” menu, as shown in picture 3-28. Press
【
up/down
】
to turn on/off switch working, and press the
【
setting
】
button to confirm, then press
【
back
】
to quit.
Picture 3-28
3
．
2
．
8 Auto clear setting
Users can delete call records as needed. In the standby state, long press
【
setting
】
once to enter the system
setting menu, as picture 3-5; then press
【
up/down
】
to move to “switch working”, like picture 3-11. Next press