Meeyi Y-670, Руководство пользователя, Страница: 7 / 14

7
Picture 3-14 Picture 3-15 Picture 3-16
Picture 3-17 Picture 3-18
3
．
2
．
1 Adding/ Deleting A Transmitter
In standby status, press and hold the
【
setting
】
button to enter into the system setting menu, as the
picture 3-5 shows, press the
【
setting
】
button twice, into the transmitter adding interface, same to
picture 3-19, 0001 indicate the no. of the zones, users can press the
【
up/down
】
button to choose the
no. of zones needs to add, press and hold the
【
setting
】
button to skip the position, each position can
select 0-9, A-Z and -,_ or blank, for example, can be settle as 8886 zone, N_88 zone, 2-N8 zone,
8-6A zone,N8 zone and etc.
Each zone can add one or more transmitters (max 999 pcs). After setting the no. of zone, the screen
displays “please trigger transmitter” in the bottom, then trigger any button of the transmitter, when
the watch received the signal, it will beep, indicating adding the transmitter successfully, and screen
will display a no. Increase, (the ahead no. represent the adding quantity for current zone,the after
no.represent the adding quantity for all of the zones). During the adding, an automatic quantity
increases for the no. means had adding a wrong transmitter which belongs to the other people, you
can shortly press the
【
setting
】
button to delete the wrong transmitters just had been added, press to
reduce one piece, until all wrong ones are deleted clearly and zero is displayed.
Picture 3-19 Picture 3-20 Picture 3-21
3
．
2
．
2 Delete All Transmitters
It has two ways to delete all the transmitters, one is for a compulsive all clear ( Please reference to the chapter of
compulsive all clear), the other way is pressing the
【
setting
】
button for one time to get into the system setting
menu when in the standby status, as the picture 3-20 shows, press the
【
setting
】
button, as picture 3-20 shows,
press the
【
up/down
】
button to move on the delete all xxx pcs line, this line showing you the total quantity of
added transmitters, then press the
【
setting
】
button, it will appear “ confirm ? Yes” press again the
【
setting
】