Meeyi Y-670, Руководство пользователя, Страница: 5 / 14

5
Buttons instruction: press-- means pressing time less than one second
press and hold-- means pressing time above three seconds
【
Setting/
】
Press and hold to skip into the setting menu, and press to go to the next menu
【
Up/
】：
Press to skip one step to the last menu, and press and hold to continuously skip.
【
Down/
】：
Press to skip one step to the next menu, and press and hold to continuously skip.
【
Back/
】 ：
Press to clear the current calling information. Press and hold to delete all calling information. When
in the setting condition, press to be back to before level menu, press and hold to be back to the origin
interface.
【
USB socket
】 ：
Connect the Micro USB plug to charge.
【
Notify Light
】 ：
Light a twinkle green when there is a call; light turns yellow when charging; light turns green
when fully charged; Light turns red when it with a low power.
3. Operation Instruction
3
．
1 Turn on/off
1.Turn on: When it is in the power off state which without any screen display, press the
【
back
】
button for 3s
until the LCD screen lighting, then it turned on and showing the current time. As the picture 3-1 shows.
2.Turn off: Press and hold the
【
back
】
button for 3s when it is turn on, press the
【
up/down
】
button and move
to the turn off line, then press the setting button to achieve but not lose the date and time. Presetting alarm
and timing power are still available.
3.Reboot: Press and hold the
【
back
】
button for 3s when it is turn on, press the
【
up/down
】
button and move
to the reboot line, as the picture 3-3 shows, then press the setting button to achieve.
4.Switch signal working ( energy saving): When the watch indicate a , this shows can be normally receive
the calling signal. You can switch it to off work in order to save energy and disturb avoiding, by pressing
the
【
back
】
button with 3s, as the picture 3-4 shows, then press the
【
setting
】
button to achieve. The
screen indicates when switch off the signal. Use the same handle method to switch on the signal, the
screen will indicate .
Picture 3-1 Picture 3-2 Picture3-3