Meeyi Y-670, Руководство пользователя, Страница: 8 / 14

8
button to delete all transmitters, (ATT: can not be recover once delete, be careful), press the
【
back
】
button to
cancel.
3
．
2
．
3 Keys Function Setting
It need to reset the keys function of transmitters when a difference between the watch displaying function and
button function on the transmitter, after the customer finish adding the transmitters. In standby status, press the
【
setting
】
button and into the system setting menu, same as picture 3-5, then press the
【
up/down
】
button and
move to the keys function setting, same as picture 3-6, then press into it, firstly set the no. of zone, press the
【
up/down
】
button to adjust the numerical value, long pressing the
【
setting
】
button to skip position, same as
picture 3-19.
After setting the zone no., press twice of the
【
setting
】
button and into the keys function setting, as picture 3-23
shows, when it screening “water”, please trigger your wanted button for water function, the watch sound a “di”
and screen a “ setting successfully” indicate the add is ok, then press the
【
up/down
】
button to reset the other
function “call,check out, order, service, cancel” ( For hospital mode will be “Medication,Call,SOS, Needle,
Service,Cancel”) buttons, trigger the related buttons when you have a need.
You can use the same method to setting the keys function of other zones, if need to be a same setting for all the
zones, you can copy a finished zone setting details to the other ones, same as picture 3-23, press the
【
setting
】
button, move to the line “ copy no.0001 to all”, same as picture 3-24, press the
【
setting
】
button again, when a
dialog box appear, press the
【
setting
】
button to confirm or press the
【
back
】
button to cancel. (You must firstly
add the transmitters then for the keys function setting)
Picture 3-22 Picture 3-23 Picture 3-24
3
．
2
．
4 Pager ID
After finishing the setting, users can allocate numbers for different demand (01-99 optional). In the standby
state, long press
【
setting
】
once to enter the system setting menu, as shown in picture 3-5. Then press
【
up/down
】
to move to “Pager ID”, like picture 3-6. Next press
【
setting
】
to enter the menu, and press
【
up/down
】
to adjust
the numeral value, as shown in 3-25. After that press
【
back
】
to quit.
Picture 3-25